Flexi Flares Fitted to RRC

[Disco_owner]

Can someone post some Pics of the 65FWA ( 50 mm ) Flexi-Flares Fitted to their Range Rover classic , I just need to get a Feel for what they should look like before I start cutting into the Virgin panels:o:p

[BigJon]

I have some on mine, I will try to find the thread with some pics.

[Disco_owner]

I have some on mine, I will try to find the thread with some pics.


Hi Jon

I found it

http://img6.imageshack.us/img6/1660/dscf2785l.jpg

Looks like the 2 x little indicator lights up the front were relocated from their original Poss??

[BigJon]

Click link

http://www.aulro.com/afvb/general-chat/71483-what-do-when-you-have-sick-engine.html

Pics on there.

[BigJon]

You beat me to it!

From memory I reused the front indicator mounting hole and drilled a new one for the now top mount. I didn't want to leave any holes visible in the guard.

[BigJon]

The bullbar wrap around parts were also modified. Cut off and rewelded shorter.

[Disco_owner]

You beat me to it!

From memory I reused the front indicator mounting hole and drilled a new one for the now top mount. I didn't want to leave any holes visible in the guard.

Good Idea , nothing like leaving empty holes in panels :D

[BigJon]

Still on the to do list is making rock sliders to fill the gap under the doors. You can see that the lower rear edge of the front flares protrudes down past the body line.

[Disco_owner]

Still on the to do list is making rock sliders to fill the gap under the doors. You can see that the lower rear edge of the front flares protrudes down past the body line.

Yeah i see it , only noticed it when you mentioned it.:angel: your rocksliders will tuck in behind the bottom of the flares and fill the void quite nicely. :)