wolvespaul
24th April 2010, 07:55 AM
My central locking only works on the drivers side, and the switch on the dash next to window switch does nothing, its a 98 model.
Any ideas?
SuperMono
26th April 2010, 02:36 PM
Locking or unlocking?
I think the default setup is that the first push of the remote to unlock only unlocks the drivers door, second push other doors.
"If your vehicle is fitted with the Single Point Entry security feature, and was locked with the handset, the handset unlocks the vehicle in two stages:
Press the unlock (Land Rover) button once to disarm the alarm and unlock the driver’s door only (see ‘Single point entry’,page 15).
Press the unlock button twice to disarm the alarm and unlock ALL the doors.
If your vehicle is not fitted with Single Point Entry, all the doors will unlock at the first press.
In either case, the direction indicators flash once and the interior lights illuminate."
Single point entry
This is a personal security feature, which enables the driver’s door only to be unlocked, leaving the other doors in a locked state. It can be operated by the remote handset as follows:
Press the unlock button once to unlock the driver’s door, press a second time to unlock the remaining doors and taildoor. Single point entry can be disabled by a Land Rover dealer.
Interior locking switch
This is a personal security feature which allows the driver to lock (or unlock) all the doors from inside the vehicle (while driving or with the vehicle stationary). Press the lower part of the switch to lock (the alarm will not be armed), and the upper part to unlock.
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.