PDA

View Full Version : LOOK! twins!


Pedro_The_Swift
3rd May 2010, 07:37 AM
https://www.aulro.com/afvb/images/imported/2010/05/1527.jpg
pop058
3rd May 2010, 08:39 AM
By the lack of the rocker cover visability and the mod plate, I take it the Corolla has a rotisserie in it ?
Bigbjorn
3rd May 2010, 02:47 PM
If the Barracuda had a 426 Hemi then the bonnet would have been open.
awabbit6
3rd May 2010, 05:16 PM
By the lack of the rocker cover visability and the mod plate, I take it the Corolla has a rotisserie in it ?

Isn't the carby on the wrong side for a rotary??

The standard 3K pushrod engine in the Corolla was fairly short and leaned over. You may not see the rocker cover.
that_kid
4th May 2010, 08:02 PM
and being a QLD P-plater i dont think that they would have a rotor powered KE55 since that would mean a blue plate....


i dont quite get the point of this thread either BTW
BigJon
4th May 2010, 08:31 PM
Isn't the carby on the wrong side for a rotary??

The standard 3K pushrod engine in the Corolla was fairly short and leaned over. You may not see the rocker cover.

Isn't that a distributor I can see at the top front of the engine. IIRC that is where a rotary dizzy is. A 3K dizzy is down low in the middle somewhere.