Will these HD track rods fit 130 PUMA Twin Cab

[pc3]

Folks wondering if these are the correct heavy duty track rods for an 09 130 dual cab ?

cheers pc3



Heavy Duty Steering Arms Includes Track Rod Ends - Defender (http://www.mm-4x4.com/heavy-duty-steering-arms-includes-track-rod-ends---defender-921-p.asp)

[Scallops]

Folks wondering if these are the correct heavy duty track rods for an 09 130 dual cab ?

cheers pc3



Heavy Duty Steering Arms Includes Track Rod Ends - Defender (http://www.mm-4x4.com/heavy-duty-steering-arms-includes-track-rod-ends---defender-921-p.asp)

They will - but why not fit a bash plate instead? I reckon you could bugger those rods too if you try hard enough.

[rangieman]

They will - but why not fit a bash plate instead? I reckon you could bugger those rods too if you try hard enough.
Good luck trying :p
I run these on my 01 Td5 Fender you would have to be doing something realy silly to bend these , Although anything can bend or break , Just not as easy as the standard rover junk ;)

[rick130]

You do realise you can buy made in Oz ones too ?

MR Automotive in Brisbane manufacture the old Maxi Drive ones that are made from 32mm OD tube.

The standard ones are a joke IMO, and in the opinion of an ex-Land Rover engineer. He told me years ago that the first thing you do when buying a Land Rover is replace the OE steering arms or at least sleeve the OE ones.

[pc3]

What is the price for the Aussie ones ? I will get a bash plate as well that's a given I have run a bash plate on my cruiser and it is very helpful

[one_iota]

Mexicans can buy theirs from Les Richmond:

Defender 2007 Onwards (http://www.lrautomotive.com.au/contents/en-us/d117.html)