PDA

View Full Version : CHIEF's 1986 110 isuzu restoration & turbo/intercooler install



c.h.i.e.f
19th May 2010, 08:31 PM
hello everyone

after a long time of arguing and discussing about isuzu power land rovers i have decided to start work on restoring,turbo/intercooling my 1986 110 county:eek: i am welcome to any ideas,suggestions and previous experiences anyone has encountered while doing such a project(photos are always welcome:D)

lets start at the begining shal we

before anything has been done



25572




i then decided it was time to start dismanteling things everywere :ange:

25573



25574



time to clean the brake drums so i pulled them of, checked the piston seals (they were changed not to long ago so they were fine)


25567

abaddonxi
19th May 2010, 09:19 PM
Linky no worky.:)

c.h.i.e.f
20th May 2010, 12:10 AM
i then checked the front brakes

25575


25576

they looked fine but still going to put new pads in :angel:

by this stage i have bead blasted my brake drums ready to give them a spray job

25577


25578


time to refurbish the original console because the standard defender one didnt fit straight in so i thought that fixing up the old one was best

25579

25580

25581

electrics needed some tidy up so i decided to convert some circuits to spade fuse rather than the old tube fuses

25582

25583

25586

25585

i then decided that since the 3bolt steering box was leaking and needed attention i splurged out and bought a new 4bolt steering box to put in :D

25587

25588

after alot of mucking around trying to get the box in i found the best way was to take of the right hand side engine mount nut and lever the engine o one side just a tad!

25589

after getting everything in where it should be i then needed to put the lines back into the box but found that the fittings on the end of the lines did not quiet fit the 4bolt box :o

c.h.i.e.f
20th May 2010, 12:14 AM
damn stupid computer one minute the photos are there the next they are invalid :mad:

cal415
20th May 2010, 01:26 AM
sign up on photobucket upload them there and post links with the img code here... way easier for people to view and u can share them from there on any forum
\

Landy Smurf
20th May 2010, 08:13 AM
yep photobucket is your best bet its really easy to use

c.h.i.e.f
20th May 2010, 11:46 AM
thanks guys ill give it a shot !

and tony i see you have what i belive may be your landy for sale at singo on the side of the road??

rijidij
20th May 2010, 10:14 PM
am welcome to any ideas,suggestions and previous experiences anyone has encountered while doing such a project(photos are always welcome:D)

There's pics of my intercooler fitment in my conversion thread here.... V8 to 4BD1T (http://www.aulro.com/afvb/isuzu-landy-enthusiasts-section/55113-county-v8-4bd1turbo-conversion.html)

Cheers, Murray

Landy Smurf
21st May 2010, 10:14 AM
no thats not mine but i was thinking about buying that one.when were you going past