my cdl lever

[nathand]

this is my cdl lever me and a mate knocked up the other day, seems like it works a treat, did it out of stainless but u could knock it up out of anythign cheap.

[ramblingboy42]

I used 8mm ss rod and fitted a rod end and ball to the joggled piece.......I welded a flat T handle instead of folding the rod down......I was concerned about something hitting it underneath....its still very easy to grab hold of......I also kept it fairly short.

[Roscoe]

Hi Any chance of getting measurements for the cdl lever you made up, I am keen to make one also.
cheers
Ross

[stevep84]

Hi Any chance of getting measurements for the cdl lever you made up, I am keen to make one also.
cheers
Ross

x2 if its possible.

Steve

[ramblingboy42]

there is a thread in here or the good oil.....I cant remember and cant quickly find it. It has an attachment.....roughly drawn with dimensions of another guys cdl lever.......maybe someone else reading can direct you to it

[Shamo]

Here's a pic of the dimensions i went off for mine,

Dimensions_Diagram.jpg picture by peterdesanc - Photobucket (http://s285.photobucket.com/albums/ll77/peterdesanc/?action=view&current=Dimensions_Diagram.jpg)

Shamo