defender rear quarter protection bar

[stig0000]

after the just simply assume weekend at cruser park, the only thing i touched was my rear quarter panel, and since i cry at the site of my car with body damage i have a front bar and rock sliders, now i need to protect the rear,

has enybody got any ideas how to mount such a thing, id really like it to face out to protect the rear lights then rap around and go down the side till were the wheel arch is,

only prob i can see is that there is no real mount for the slider at the arch end??;)

i have the checker plate trim at the bottom and for my sliders i removed it to make the slider as high as possible, id like to do the same for the rear,

[TimNZ]

Hi Stig0000, I ended up making my own:

http://www.aulro.com/afvb/projects-tutorials/58663-110-defender-bumperettes.html

Cheers,

[stig0000]

that was fast:D, i did a search and everything and found everything but, but still id there is others love to see, and hope to get the best of all, :D:D

[Drover]

You wont go past Mulgo Bumper-Ettes.

They are built super strong out of very heavy gage steel and made very very neat. As well as that they are made to fit with most of the after market wheel carriers.

Give Daniel a ring or check out their we site, Mulgo are supporters of this site.

[DeeJay]

I was just looking at the Rovacraft specials for Melb & saw these.

https://www.aulro.com/afvb/images/imported/2010/06/898.jpg

$350, But not a real lot of side protection..

[SVX37]

If you search a recent thread named BUMPERETTES by MULGO - YOU WILL SEE MY PICS...:)

[VladTepes]

Cripes - at least you people have a cross member right at the rear of your 110's

Stop ya whinging !

[Ranga]

The Rovacraft and Mulgo jobs look identical. Are Rovacraft reslling the Mulgo units?

[Gav110]

Guys, Daniel (Mulgo) can custom fabricate any size or style of side/rear quarter protection bar you require - with or without chequer plate, step-style or tubular. The models he has on his site (including side steps/sliders) are just one model.

I have him building me a set of custom rock sliders with 15cm wide treads, with full length chequer plate, and a custom shaping front and rear. Will post photos when done...

Suggest you give him a call/PM.

[sclarke]

Full Quarter Protection, how i did it...

https://www.aulro.com/afvb/images/imported/2010/06/574.jpg
https://www.aulro.com/afvb/images/imported/2010/06/575.jpg
https://www.aulro.com/afvb/images/imported/2010/06/576.jpg

Hope that gives you some ideas

[Gav110]

Lovely work mate - you are a handy young lad!

[AdsLandies]

Had a go at making up mine too. Also doubles as a mount for the High Lift Jack. Will attempt to add a photo or two - haven't tried before so hope it works.
26472

26473