PDA

View Full Version : GME 3220 Help



Bazzle218
16th July 2010, 07:08 PM
I have just re installed my 3220 in the roof consul and have a problem. I have run a new antenna to a gutter mount, I have good reception but i am unable to transmit. The unit appears to be working ok as when i press the hand peice the transmitt bar comes up on the side of the lcd. Any Ideas befor i buy another antenna or spend money on getting unit serviced.

dmdigital
16th July 2010, 07:18 PM
Have you checked the Mic and its lead and connector.

Radz
24th July 2010, 02:02 PM
With gutter mounts earthing can be a problem. Even a ground independant aerial needs a good earth before it will work well.
Generally I tend to avoid gutter mounts particulary on 4WD's as they become loose with the shaking about and bashing against tree branches etc.

A bullbar mount is stronger although being lower down on the car does not give as good a range coverage.

If the tx LCD bar comes up when you hit the PTT this means the mic should be ok unless there is a faulty mic insert which means your voice will not be heard.

Suggest first take the 3220 to a technician and have it tested to see all is well.

Freestyler
11th August 2010, 05:35 PM
Ground independant antennas are exactly that and do not need to be earthed! How have you come to the conclusion that it is not transmitting? A watt or SWR Meter is the best way of finding out what is going on. If you bought it from a Two Way Radio Company take it in and they should be happy to help you out.
Tim