TM2 installation

[e3j]

OK, just bought a TM2 temp monitor/alarm. Trying to work out how to get the sensor cable through the firewall. I'm sure it's dead simple but I'm burgerred if I can see how. Do I have to drill a hole? If so, where? Also any idea what is a "normal" operating temp for a D2 TD5?

[stig0000]

theres a boot about halfway down the firewall, just as it flows to the wheel arches, its masive you cant miss it, look over at teh abs side and folow the big black harninss and you will see were it gose in,, its the same for the drivers side, bit harder to get at tho

[disco_thrasher]

search is your good friend on this site if it is out there there has to be a few that have posted about it there are quite a few on here that have installed them ,there is a rubber bung on the fire wall just up from the foot peddles ,my temp is around 89 but i know other disco td5 who avrg temp in 84 so you just need to drive it to see what your disco avg temp is
cheers kelvin

[e3j]

theres a boot about halfway down the firewall, just as it flows to the wheel arches, its masive you cant miss it, look over at teh abs side and folow the big black harninss and you will see were it gose in,, its the same for the drivers side, bit harder to get at tho


Many thanks. I actually found an unused plug a bit further to the left of the one you mention. Anyway all is good - it's in and working.