PDA

View Full Version : Comprehensive list of bullbar manufacturers



Perspicacious
24th July 2010, 06:53 PM
I would like to build a list of all Australian manufacturers of bullbars for the Defender. There are plenty in the UK but shipping costs are prohibitive.

So far I have:

ARB (http://www.arb.com.au/resources/pdf/products/LandRoverDefender_DeluxeWinchBar_April2010.pdf)

Dolium (http://www.dolium.com.au/view/page/120/item/LRBBR.html)

TJM (http://www.tjm.com.au/Portals/0/Brochures/landroverR2.pdf)

There must be other manufacturers. If you know of one, please list it.

Edited to add:

Les Richmond Automotive (http://www.lrautomotive.com.au/contents/en-us/d4880.html)

Landrover Tuning (http://www.landrovertuning.com.au/shop/defender/protection/tubular-winch-bumper-a-bar.html)

cewilson
25th July 2010, 10:54 AM
Landrover themselves;
East Coast Bullbars (ECB);
Ironman

greenhornet
25th July 2010, 03:51 PM
Opposite Lock also do bull bars

PBob
25th July 2010, 05:10 PM
Er, I could stand corrected, but I asked East Coast and they didn't make a bar for a Deefer, only Discos?:confused:

Perspicacious
25th July 2010, 07:25 PM
East Coast Bullbars do not make a bar for the Defender.

Correct me if I am wrong, but I believe that Opposite Lock use the Dolium bar.

BlueWagon
25th July 2010, 07:38 PM
I would like to build a list of all Australian manufacturers of bullbars for the Defender. There are plenty in the UK but shipping costs are prohibitive.

So far I have:

ARB (http://www.arb.com.au/resources/pdf/products/LandRoverDefender_DeluxeWinchBar_April2010.pdf)

Dolium (http://www.dolium.com.au/view/page/120/item/LRBBR.html)

TJM (http://www.tjm.com.au/Portals/0/Brochures/landroverR2.pdf)

There must be other manufacturers. If you know of one, please list it.

Whoever makes the bar that came with the TD5 Extreme defenders (see pic below). I tried to buy replacement light lenses and it is definitely not an ARB or TJM bar and I'm pretty sure it is made by Dolium either. I'm not sure where Landrover got them from.

Cheers
Mark

5teve
26th July 2010, 01:18 PM
is that an alloy bar? cant see cause of the mud! i have an alloy on mine with what looks like the same lights.. i thought it was custom made...

Steve

VladTepes
26th July 2010, 04:14 PM
East Coast Bullbars do not make a bar for the Defender.
correct
East Coast Bullbars. Manufacturers of the World's Best Alloy Bullbar. (http://www.ecb.com.au/dhtml/index.htm)



Correct me if I am wrong, but I believe that Opposite Lock use the Dolium bar.

That's also my understanding.

VladTepes
26th July 2010, 04:18 PM
Ironman

No. They don't have any LR bars listed...

Ironman 4x4 Commercial Bullbars (http://www.ironmansuspension.com/html/blackcommercial.html)

VladTepes
26th July 2010, 04:36 PM
This mob claim to have one to suit EVERY car
MATADOR Bull Bars & Tow Bars - Bull Bars (http://www.matadorbullbarstowbars.com.au/matador/bullbars.htm)
I'm cynical trhough.


This mob in Brisbane do Custom bars
4x4 Bullbars and Nudge Bars for 4WDs and Utes - Custom Alloy - Manufacturing Australian Products (http://www.customalloy.com.au/gallery/4wd-utes.html)
though whether they do / have done / will do a Defender bar - you'd have to ring them.

In short unless you get someone to fabricate one for you, the list in post 1 is pretty much it !

On the Opposite Lock site,
Defender Steel Winch Bullbar at Opposite Lock Australia (http://www.oppositelock.com.au/index.php?next_page=product/product_detail.php&product_id=14255&category_id=581)
it says

Defender Steel Winch BullbarProduct Code:LRBBRRRP: $1,295.00

Land Rover Defender Steel Winchbar
Designed to minimise the turning circle by ensuring the outer corners of the bullbar are as close to the vehicle as practical - whilst still ensuring good protection in the event of a solid impact
Includes 2 x driving light tabs, a radio aerial tab, jacking points and a winch mounting platform capable of accepting most low mount electric winches to 10,000lbs
Also includes tabs to mount the optional steel cable brush guards - refer Part No: LRBBWD
Black powder coat finish.


Product specification

Pictures supplied by::Dolium

Pictures supplied by Dolium.. so that answers that question.

There are plenty of options out there for Discovery bars, spoilt buggers, but if anyone is in the industry there is a business opportunity for you ! Are you listening Hard Range Australia ?

ScottW
27th July 2010, 08:28 AM
I have come across these whilst looking for a tubular winchbar. I think everyone knows the second one, but the first one was new to me.

Les Richmond Automotive (http://www.lrautomotive.com.au/contents/en-us/d4880.html)

Landrover Tuning (http://www.landrovertuning.com.au/shop/defender/protection/tubular-winch-bumper-a-bar.html)

Anyone have any actual experience with them?