gas converter

[cazzz12000]

Hi guys just replacing my heater matrix in my 93 pre update disco and dont know if I ve done the water flow to the converter correctly? What I ve done is tapped into the heater hoses with to T pieces one feeding hoses and one return hose,will the converter get enough flow hooked up this way and does the heater feed go to the top or bottom on the converter? zacc

[95disco1]

As a gas installer, As long as the heater water flows threw the bottom of the converter, it wont freeze over.
Taping into both heater hoses is the best way to do it.
If you have any problems feel free to pm me and ill get back to you asap with an answer.
Paul

[bee utey]

The only time this can be a problem is if you have a 4-port heater valve in the lines to the heater. Then when the heater is off the flow through the tap could rob too much flow from the converter. Most D1's don't have this tap but I have seen a few with it.