chassis

[85 county]

ok so I hit some thing a bit hard, well not really I fell down a wash out.

Anyone know of an outfit who could straiten my chassis in SA

[lambrover]

Put up a photo, I have put dinges in my chassis, but it is fine. You could just weld some skid plates on the chassis.

[Xul]

I'd chat to Triumph Rover. They probably wouldn't be able to do it but I'm sure they would recommend someone who could.

[85 county]

I'd chat to Triumph Rover. They probably wouldn't be able to do it but I'm sure they would recommend someone who could.

Tried that, but the response was some thing along the lines of its an old " pile of ****" and that I should just spend 20 odd K on the TD5 that they have there.

That being the normal level of TRS customer service

[Bearman]

Unless it is really bad, most dings in a chassis can be fixed/straightened. As Lambrover said put a photo in so we can have a look how bad it is.

[85 county]

Unless it is really bad, most dings in a chassis can be fixed/straightened. As Lambrover said put a photo in so we can have a look how bad it is.

Passenger side rail, front of the leading arm mount is about 2" higher
its not a ding