Help needed fitting snorkel

[fender22]

Hi, bought a snorkel off ebay (TJM) lightly used). Looking at how to go about fitting it tonight and I assume it goes on the drivers side. The brake booster looks like it may be in the way somewhat? Do you just cut a large hole out to fit the nozzle through or get the jigsaw and cut out the whole section inside the gasket?

Mine is a 200TDI so the air filter is over the towards the passenger side. I know this is going to be a dumb question, but what do I attach it to? I'm assuming the big can with the pipe going to the turbo is the air filter. The snorkel has a short nozzle that goes through the body, then there's another rigid piece about a foot long, but no where near long enough to get to the air cleaner of course.

http://i1041.photobucket.com/albums/b413/fender222/1993%20Defender%20110%20Wagon/Snorkel.jpg

https://www.aulro.com/afvb/images/imported/2010/10/564.jpg

[tazd]

from what ive seen and my limited knowledge on 200tdi the snorkle normaly goes on the passanger side. think you might have a 300tdi snorkle there but i may be wrong.....

[weeds]

yep, reckon you have a 300tdi snorkel.....

[Blknight.aus]

I'll be doing a weekend of mechanicing and general round the house stuff.

your welcome to head on over and we'll see what we can do.

[fender22]

I think there's even less room on the passenger side. I think the heater box would be well and truly in the way

[fender22]

I'll be doing a weekend of mechanicing and general round the house stuff.

your welcome to head on over and we'll see what we can do.


Very much appreciated! Very kind of you. I think I have it sussed now.

[dmdigital]

Yep, 300Tdi one. What you could do though is get a 200Tdi one and fit dual intakes. That would improve things :)