DRIVERS TOP

[series1buff]

A long shot this :

Does anyone have a 80" canvas pattern or old top I can use to copy. The short drivers cab top .

I will make a few at the basic material cost if I can find a pattern. A free top to the person who finds a pattern !

The drawing in the parts book is useful but doesnt show details

Mike

[dennisS1]

Did we not start this once before?
I have an original and an Exmore one, will need to get out the original and have a look and send you some pics to see if it will do then ship it off to you.
Dennis

[digger]

of course you'll make sure all measurements etc are posted up for all of us....please?

[series1buff]

Did we not start this once before?
I have an original and an Exmore one, will need to get out the original and have a look and send you some pics to see if it will do then ship it off to you.
Dennis

Hey that is great Dennis ,

My neighbour drives up to Ballarat a few times a year ..he's into medieval re-enacting .But I'll pay postage to you no problem if that is more convenient.

I read the installation instructions in the operations manual, it's somewhat confusing to say the least.... strap X goes to part Z etc.... bloody awfully complicated.

Yes no problem , can post dimensions and drawings here on this forum

I did draw up the original full top I had a loan of from MARCO in West. Aust. My drawings are more sketches than proper work, but the idea is there and I took many pics of it from endless angles.

MIKE .... Gippsland > home of the 80" Rover

[1953 BEADELL]

The fume curtain? or cut and shut a normal 48 soft top as seen in the green owners handbook at the back of the book.??????????