PDA

View Full Version : Under bonnet camping hot water exchange



glenhendry
11th February 2011, 08:11 AM
I just bought one of these. I was wondering if anyone has any experience fitting these to P38s, and if there was any great advice about where to mount and what to look out for?

Secondly, I wish to install an additional cig lighter socket under the bonnet to power the shower pump - where is the best point on the fuse box or battery to source power from? anyone done this and got pics?

Thanks for any info!

p38arover
11th February 2011, 08:26 AM
Secondly, I wish to install an additional cig lighter socket under the bonnet to power the shower pump - where is the best point on the fuse box or battery to source power from? anyone done this and got pics?

I mounted a secondary fuse box on the lip of the mudguard just under the bonnet near the brake booster:

https://www.aulro.com/afvb/images/imported/2011/02/945.jpg:

glenhendry
11th February 2011, 08:40 AM
Thanks Ron. Sorry to be dim, but did you source power for that rail of fuses straight from the battery, or from some clever place on the fusebox that is controlled by the ignition switch?

I am secretly hoping (with all the talk of P38s overheating), that the big heat exchanger will act as an additional small radiator when Brisbane is at its warmest ;)

PS: I had a XJR13 too, nice bike!

daljames
11th February 2011, 11:35 AM
Dont forget to get a set of O rings if you touch those pipes!

glenhendry
11th February 2011, 11:43 AM
Dont forget to get a set of O rings if you touch those pipes!

I did my heater core orings 4 weeks ago. They better not need replacing already!!!! :)

p38arover
11th February 2011, 01:11 PM
Thanks Ron. Sorry to be dim, but did you source power for that rail of fuses straight from the battery, or from some clever place on the fusebox that is controlled by the ignition switch?



Directly from the battery via its own main fuse.

996TURBO
5th September 2011, 03:31 PM
Hey, looks like this thread isn't finish. We need photos and infos about the install?:o

glenhendry
12th September 2011, 12:54 PM
Hey, looks like this thread isn't finish. We need photos and infos about the install?:o

You are right. Here they are:

p38arover
13th September 2011, 07:10 AM
Thanks Glen. What brand of heat exchanger was it?

Also, still awaiting pix of your XJR1300!

glenhendry
13th September 2011, 08:14 AM
Sorry, I am leaving details out everywhere!

It is a Helton heat exchanger: Helton camping hot water system (http://www.helton.com.au/hot%20water%20system.htm)

I will post some pics of the XJR tonight.

996TURBO
13th September 2011, 07:55 PM
Sorry, I am leaving details out everywhere!

It is a Helton heat exchanger: Helton camping hot water system (http://www.helton.com.au/hot%20water%20system.htm)

I will post some pics of the XJR tonight.
That's great !! I need to find a place for that under my hood. Looks like the lady will like that ;)