Pipe Clip

[paulk]

I have attached a photo of a (broken) plastic double pipe clip (?), spacer (?),
form by D2. Approx 5mm. A few have broken, old age I guess.
Does the forum know where replacements can be obtained.
There is a number on it - POM & B4V0A. I have googled it but no luck.
Cheers!

[Bearman]

Have a look on ebay.com.uk. There is a lot of this sort of stuff there if you do a land rover search. You may be lucky!

[p38arover]

It would help if you told us where it is located and what clips into it.

The pic is blurry but is it a "Clip - Brake Pipe Double, one hole" p/n ADU6075L

[paulk]

Sure.
There is a pipe from top of radiator to top up bottle, underneath is a wire from top of radiator to sensor underneath bottle. Both approx same size. Both run next to jack carrier. Separated by two of these plastic "W" clips. Clips do not attach to the body, just the pipe and cable.
Hope that makes sense.

[p38arover]

In the pic it looks like the channels in the clip are not of equal size. Is that correct? Can you take a focussed pic?

The only double clip I can see in Microcat for the cooling system is ESR1489 but in the drawing it looks like the channels are equi-sized. This clip doesn't appear to attach to anything but there is something between the channels. It doesn't look like your pic.

Microcat indicates there are three used on the car.

Oh, BTW, is your car a petrol or diesel?

[Bundalene]

Hi, if this is a clip attached to the hard plastic line from the fill bottle to the radiator bottle, I would suggest replacing this line completely with a new coolant hose available from most auto accessory shops - sold by the meter. This line is known to become brittle and fracture.

From memory it is an 8mm line.

Erich

[paulk]

Thanks, the line looks OK but I'll check it also.
Thanks for the tip on the ESR1489. It does look close so I'll call past ULR and double check.
Thanks to all.