wiring up additional reverse lamp on D2

[feraldisco]

if using a low wattage led lamp, I assume you can just tap into the reverse light wire at the tail lights - or do most people run a wire to the gearbox switch (which doesn't seem particularly accessible at a quick glance). I don't want to bother with a relay if I don't need to and presumably a LED doesn't need a thick wire off the battery

[Tombie]

I run 2x 50W lights in place of my factory lights...

I'm sure your LED lamp wont be an issue.

[CraigE]

Just tap into the existing reversing light wiring. I did and have no problems. I changed my lights so I now have 2 rectangle reverse lights and have changed the fog light into brake lights and done the same.