td5 not starting

[Fender Bender]

Hi All,
Checked out other treads couldn't find anything. Td5 130 dual cab started in the morning got to servo to put fuel in about 3 mins away and it wouldn't start after filling up.:mad:

[slug_burner]

search for crank position sensor or immobilization switch

[akelly]

Could be the fuel cut out, black button on the firewall.

[ericpicc]

If that does not work, look at the fuze box under the drivers seat and see if the fuel pump fuze has blown.

This happened to us a while back stopped somewhere and went to restart and nothing, after much push starting and head scratching no go, found out fuel pump was shot.
Bought one from John Craddock UK 186.13 pounds with postage ($298.00) Better then $800.00 plus here.
Well I hope it's not that for you anyway;)

[hagus]

Try wiggling the relays under the drivers seat. Mine did the same thing. Ended up bending the legs on one to maintain a good contact. Haven't had the problem since.

Cheers

[fishripple]

Is this a, engine cranks but won't start or won't even throw the starter won't start?

Cheers

[scottygc]

not sure how old it is

maybe starter soloniod?

happened to my 2000 model

[Fender Bender]

connected wire from battery to starter motor and drove it home so there is a problem with the wireing some where? where do i start?

[ericpicc]

:o Oh yeah !
Forgot about the relay mine did the same bought a new one and was all good till fuel pump gave out.

And that reminds me Fender Bender mine did the same when I first bought it and we were stuck on the side of the road all night, dealer had it towed back to his workshop and mechanic spent hours looking for the fault, then just did a patch up job to get us on the move(ran I power wire from relay box under drivers seat to ?????) with a promise that the wiring loom would be replaced.
When I returned owner had sold business and new owner would not honour the replacement.
Not a happy person, but it still works to this day, so cross fingers.