County wheel offset

[land864]

Some questions if I could please.

1. What is the standard ride height to a common reference point somewhere on a 1985 110 Isuzu?
2. What is the widest legal wheel offset increase for a wider track without doing a lift? ( Standard is 33mm positive?)
3. Having done that offset change , what is the largest legal tyre fit that can be done on normal width D1 rims?

Thanks. Just putting together the build up specs.

Pete

PS . Anyone want another 110 County and Fender day organised in June this year?

Pete

[steveG]

Some questions if I could please.
[snip]
PS . Anyone want another 110 County and Fender day organised in June this year?

Pete

Sorry, cant help with the wheel info Pete, but another County/Defender day in June would be great :)

Steve

[kaa45]

dumb question....of course we want another 110 day
last one was great :D
cheers
Danny

[1103.9TDI]

......as long as it's somewhere in FNQ:D

[lokka]

......as long as it's somewhere in FNQ:D


Stockton beach would be better its about half way between FNQ and Melb :D

As for the other Q's biggest tire id fit to a D1 rim would be a 285/75/16 which i have fitted to some here and its a good match tho to run them on a county/defender they need the offset changed as they will most likely rub on the rear spring perch .

I would also like to know the standard hight or should i say bump stop clearance of an isuzu 110 .

As for wheel track im sure you are only allowed 1 inch over standard width in total so thats 1/2 inch per side but im sure you can get more eng'ed tho most states dont enforce it and the fuz are usualy happy if the tires are covered by a flare .

[ScottW]

1. What is the standard ride height to a common reference point somewhere on a 1985 110 Isuzu? There are measurements somewhere from the diff to bumpstops. I can't remember what they are though.
2. What is the widest legal wheel offset increase for a wider track without doing a lift? ( Standard is 33mm positive?) I'm running zero offset rims that seem to fit fine. Not sure what std offset is.
3. Having done that offset change , what is the largest legal tyre fit that can be done on normal width D1 rims? I had 235/85/16's on D1 rims. They just rub on the rear spring mounts on articulation. (Counties have larger springs.) I'm now running 255/85/16's on the zero offset rims and everything clears except a slight rub on the exhaust on full articulation (isuzu)

My car is standard height.

[Wal Rat]

I run Max Offset with rims reversed (D1) 50mm lift never had a problem.