View Full Version : 2005 110 Reversing light fail
Mudnut
6th May 2011, 08:03 PM
I pulled the reversing light apart this morning, and found the globe to be O.K.  Is there a switch that activates when reverse is selected?  If so, where is it?  What should I be looking for?
Thanks,
Ken
flagg
6th May 2011, 09:04 PM
The switch is on top of the gear box, its actuated when the lever is physically placed in reverse.
Mudnut
7th May 2011, 04:55 PM
Thanks for that, is it where I can feel or get at it without dropping the gear box?  
Ken
justinc
7th May 2011, 05:02 PM
2005 110 has an R380, switch is Passenger side of trans 2/3rds of the way down to the side. difficult to reach in a Defender:(. Could just be wiring connector, sits on top of the transfer case as the wiring goes back and over the top of the case.
Are fuses OK? AFAIR the alternator fuse is also the reverse lamp fuse, does the alternator charge lamp come on when you switch on the ignition?
JC
Mudnut
7th May 2011, 06:44 PM
2005 110 has an R380, switch is Passenger side of trans 2/3rds of the way down to the side. difficult to reach in a Defender:(. Could just be wiring connector, sits on top of the transfer case as the wiring goes back and over the top of the case.
Are fuses OK? AFAIR the alternator fuse is also the reverse lamp fuse, does the alternator charge lamp come on when you switch on the ignition?
JC
thanks,
I will check in the morning.
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.