Bullbars for LE

[Pilbara130]

Hi guys,

What are the Limited Edition Puma boys doing regards to fitting a bullbar.
They say you cant get one for the new beast is there some where you can get one modified to fit?
My mate has tried every where to get one with no luck any advise would be great.:)

Cheers

Dan

[PAT303]

I'm getting a D44 high mount bar from Devon LR. Pat

[Drover]

Hey Pilbra,

Choices are limited as far as a full bull bar is concerned.

The new ARB just wont fit, it sits to close and the side wings are to high, they sit across the driving lights and there is not much that can be to make it suit.

I ended up buying the old style ARB and very carefully cut away the bottom set of bars. Then used a little bog and re painted it.

The mods look great and it looks okay on the vehicle and certainly does the job.

Cheers

https://www.aulro.com/afvb/images/imported/2011/06/1177.jpg

[Nera Donna]

Hey Pilbra,

Choices are limited as far as a full bull bar is concerned.

The new ARB just wont fit, it sits to close and the side wings are to high, they sit across the driving lights and there is not much that can be to make it suit.

I ended up buying the old style ARB and very carefully cut away the bottom set of bars. Then used a little bog and re painted it.

The mods look great and it looks okay on the vehicle and certainly does the job.

Cheers

https://www.aulro.com/afvb/images/imported/2011/06/1177.jpg

What Drover said is exactly right. I ended up putting on a TJM type 13 with no modification. Blocks the driving lights, but what can you do?
Your front end is the same as the SVX, so you can check the treads on SVX bullbars. It's been done to death. Rover craft winch bar wont fit either. Custom or modify are your only tww options.
Cheers
Craig