PDA

View Full Version : Diagnostic Devices - DashDaq



Caboose
11th June 2011, 09:26 PM
Has anyone plugged a DashDaq into a Defender TD5 with any success?

The manufacturer's website lists 'Land Rover' in its compatibility list however it doesn't stipulate which models. After contacting them I was advised the Defender TD5 hasn't been tested yet but were sure that it would communicate with the ECU but couldn't confirm which parameters could be read.

I understand the OBD-II protocol is a bit 'different' so only a handfull of diagnostic tools work with the TD5.

DashDAQ from Drew Technologies (http://www.dashdaq.com)

Cheers

33chinacars
22nd June 2011, 11:24 AM
Has Anybody used the DashDAQ on a TD6 or even an early L322 Range Rover. Interested in others thoughts

Gary

33chinacars
21st October 2011, 09:04 PM
Bump

inside
21st October 2011, 09:37 PM
It's OBD2. If a LR vehicle is OBD2 compliant then maybe just get the necessary iPhone or Android app? https://market.android.com/details?id=org.prowl.torquefree&feature=search_result#?t=W251bGwsMSwxLDEsIm9yZy5wc m93bC50b3JxdWVmcmVlIl0.

33chinacars
22nd October 2011, 12:52 PM
Thanks but don't have iPhone or tablet

Gary

It'sNotWorthComplaining!
22nd October 2011, 01:38 PM
Thanks but don't have iPhone or tablet

Gary So by the time you buy the unit and an iphone or a Ipad, you could have bought a Hawkeye or similar that does the job

33chinacars
22nd October 2011, 02:41 PM
Was looking at it more as additional gauges than a diagnostic tool. Bit like a Scangauge II only bigger display & better. I think. Looked at the Scangauge II but for my eye's figures too small.

Gary