Body builders

[Pilbara130]

Hi guys,

Any one know of any good steel tray builders in either QLD or W.A?

Have been looking at a new 130 but will need to put a tray on to meet my needs.

Any Info from people who have had one built in the last few years would be great.

Cheers

Dan

[Nero]

My 120 has a GT aluminium one from Bunbury although tis just a basic drop side steel tray they have a pretty good rep and have been around for a number of years. Actually there is a 130 TDI in Bunbury 4WD wreckers (been rolled) with a tray with a few tool boxes and the like might be worth chasing up Tray still looks ok admittedly I didn't look at it really closely. I'm assuming you are familiar with the usual suspects of Rossco's and TL engineering.

[Narangga]

TL Engineering in Bayswater (Perth) www.tleng.com.au.

[Pilbara130]

My 120 has a GT aluminium one from Bunbury although tis just a basic drop side steel tray they have a pretty good rep and have been around for a number of years. Actually there is a 130 TDI in Bunbury 4WD wreckers (been rolled) with a tray with a few tool boxes and the like might be worth chasing up Tray still looks ok admittedly I didn't look at it really closely. I'm assuming you are familiar with the usual suspects of Rossco's and TL engineering.

Cheers mate,

I know of TL but who are Rossco's where are they based?

Also do you know the name of the wreckers?

Dan

[Nero]

Roscos — Every Tradie's Dream (http://www.roscos.com/) Perth based

Link for GT Aluminium http://gtfab.com.au/

If you ring Bunbury Towing they share a yard with the wreckers (08) 9725 7588 should be able to sort you out.

[Pilbara130]

Roscos — Every Tradie's Dream (http://www.roscos.com/) Perth based

Link for GT Aluminium Welcome to GT Fabrication (http://gtfab.com.au/)

If you ring Bunbury Towing they share a yard with the wreckers (08) 9725 7588 should be able to sort you out.

Thanks mate.

[woodsie1478]

130 now Dano hope you get it!!!