Assistance needed gold coast

[Elblado]

Is there anyone on the gold coast that would be willing to give me some guidance/assistance to make a couple of repairs to a 1993 110. I need to replace the exhaust manifold gasket and the rear a-frame ball joint. It's not regd so I have to do it at my place. I'm reasonably ok with basic stuff just never tackled these jobs before. Willing to trade whatever, beer etc. Just so long as it gets done and I learn something.

[Psimpson7]

Which end of the coast are you?

Do you have a press to fit the ball joint?

Cheers

[Elblado]

Which end of the coast are you?

Do you have a press to fit the ball joint?

Cheers

I'm in the middle...Mermaid Beach. I don't have a drill press, I was hoping I could thump it in. Ive read a few posts where sometimes it works some times it doesn't.

[Ratel10mm]

The mechanicing I can't help with, the press maybe I can.
I have a medium-ish fly press here (max. throat about 1 coke can high, although there possibly are workarounds if required & you're not in a rush) if you can get / bring the parts to me. I'm at Elanora.

[Elblado]

The mechanicing I can't help with, the press maybe I can.
I have a medium-ish fly press here (max. throat about 1 coke can high, although there possibly are workarounds if required & you're not in a rush) if you can get / bring the parts to me. I'm at Elanora.

Tar. I'll remove tomorrow and see if it budges. A press may be handy which case with it removed I can run it over. I'll pm you if needed. Thanks for the offer.

[langy]

PM sent

[Ratel10mm]

Tar. I'll remove tomorrow and see if it budges. A press may be handy which case with it removed I can run it over. I'll pm you if needed. Thanks for the offer.

Feel free. & you're welcome. :)

[boger]

If you want to do a tutorial with photos am willing to take pictures as long as on weekend ok:)