View Full Version : Shibaura 5040T
JohnF
15th December 2011, 10:00 AM
Other than my Disco, my other 4wd is a Shibaura 5040T tractor. Does any one know the equavalent Ford Model number. Some Ford tractors were Shibaura rebranded. I have not had luck so far with google. Perhaps I am searching using wrong terms.
I need a New Starter motor and that is what I am chasing for it.
incisor
15th December 2011, 10:10 AM
GreyMarketTractorClub on yahoogroups
would be a good place to start
tractordata.com is another good one
and
http://tractorpoint.com/cgi-bin/tractorreview/forum.pl?category=SH&catname=Shibaura
will d8r
15th December 2011, 12:02 PM
Would it be a Ford 2120 bout 45 hp
Cheers Will
rick130
15th December 2011, 05:11 PM
John, this crowd is the official distributor/importer Inlon Agrimec Group - FREECALL 1800 772 407 - Email mail@inlon.com.au (http://www.inlon.com.au/)
Can't work out what Ford/New Holland it may be yet.
Davehoos
15th December 2011, 09:27 PM
we have one on the farm in daily use
I often get the numbers mixed up but it was the biggest 3cyl turbo 4X4 IHI shibaura.most of my neighbours bought the little tractor.
the rear tyres are larger than standard and came a few weeks after delivery.
it was one of if not the first in country.
it was assembled in towoomba.
an engineer came from japan and modifeid the clutch plate and over filled the gearbox oil after long term testing.
after they closed up-went broke ?? the ford dealer on parramata rd took over assembly.
this is what some confuse as im told some are painted ford new holand blue.
when this deal folded they became IHI case.
we buy parts from case easily.i recently replaced raciator with a supplied modified IHI radiator.
rick130
16th December 2011, 06:13 AM
Dave, New Holland still use Shibaura's in their small line of tractors and the IHI isn't International Harvester (as in IH-Case, who are now part of New Holland) but IHI as in the Japanese turbocharger people.
IHI Shibaura Machinery Corporation is a subsidiary of IHI Corporation and was established in 1950 in a joint venture between Ishikawajima Shipyard (now IHI Corporation) and Shibaura Engineering Works Co., Ltd. (now Toshiba Corporation) with the intention of providing Japan and the rest of the world with the most comprehensive products in a wide range of fields.
About Us | IHI Shibaura Machinery Corporation (http://www.ihi-shibaura.com/english/aboutus/)
wrinklearthur
16th December 2011, 08:11 AM
This is the closest I can get for a Ford ( 40 hp )
TractorData.com Ford 2120 tractor information (http://www.tractordata.com/farm-tractors/005/9/3/5933-ford-2120.html)
NZ for second hand parts.
http://www.millarsmachinery.co.nz/used-parts
Davehoos
17th December 2011, 03:10 PM
this looks the same except the fron tyres.the rear tyres are the larger wheels on the 4cyl shown bellow.
these are welded center rims that are normally on smaller tractors.
dad done a water pump this week and put the fan blade again through the radiator.
the Kit was bagged IHI-CASE from case equipment cardiff.
the radiator was taged international and not IH-CASE that I ment to write.
http://images.trademe.co.nz/photoserver/9/191746009_full.jpg
Davehoos
17th December 2011, 03:15 PM
https://www.aulro.com/afvb/images/imported/2011/12/555.jpg
It was strange when i went to NZ.lots of jet boats i saw using fordsons to put the boats in the water.these a the time was being replace with the 5000 series
my dad bought the 50hp tractor to replace the 40hp fordson.what we hadnt known that because of the 4X4 we didnt need anything that big.
Powered by vBulletin® Version 4.2.4 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.