Isuzu Light Trucks - Stud Pattern

[101RRS]

I was looking at a 90s Isuzu light truck (about 101 size) and noticed that it had a six stud wheel pattern and hub hole size that looked like it would be a close match to the 101 pattern. Certainly larger than the standard toyota/jap 4wd 6 stud wheel pattern.

Anyone know the PCD, stud dia, and hub whole diameter of the wheels on these trucks?

Tried Googling the information but drew a blank.

Thanks

Garry

[Homestar]

Not sure if all years had the same PCD - I think they do...

Smaller trucks -
5 stud - 203.2mm PCD (Factory steel rims available were/are 5.5 x 16 or 6.00 x 17.5")
6 stud - 222.25mm PCD (Factory steel rims available were/are 5.5 x 16, 6.00 x 16 or 6.00 x 17.5)

The bigger trucks had 8 or 10 stud rims.
8 stud - 285mm PCD
10 stud - 335mm PCD

Not sure on stud diameter or hub diameters off the top of my head.

Cheers - Gav

[101RRS]

Thanks Gav - looks like they are close but not close enough to the 101 pattern.

Cheers

Garry

[wagoo]

Thanks Gav - looks like they are close but not close enough to the 101 pattern.

Cheers

Garry

What, you thinking of running dual wheels Garry?
Bill.

[101RRS]

No -just curious.

[Homestar]

Worth a shot - as they say, you don't know if you don't ask.:)