View Full Version : If it don't rain in the pilbara it .....don't rain!
lardy
16th January 2012, 12:52 PM
Hello only me!
Trying to get the flange cap off so I can do the other side cv joint do you think it will budge ??
Er no it's on for the duration have tried a tender belting of the stupid hub spanner with a bar through it to no avail.
Might go to karratha and see if atom do one that is less rough as guts and see if I can get a better fit. Any ideas apart from that would be appreciated.
---
I am here: http://maps.google.com/maps'll=-20.682615,117.140359
Sent from my iPhone using Telepathy
Hoges
16th January 2012, 01:13 PM
rewind... what do you define as the 'flange cap'...
djam1
16th January 2012, 02:08 PM
Probably got a B big wrench you can borrow if you want
lardy
16th January 2012, 02:14 PM
Djam are you in the pilbara? If so where we should meet and talk rubbish lol!
All done broke it by using the handle on the trolley jack,just needed more love I guess thanks guys
---
I am here: Google Maps
Sent from my iPhone using Telepathy
Rusnut
16th January 2012, 02:14 PM
a little well placed heat never goes astray
lardy
16th January 2012, 02:15 PM
Ah Karratchi,are you near the tavern?
---
I am here: Google Maps
Sent from my iPhone using Telepathy
lardy
16th January 2012, 03:12 PM
How to not cook whilst sticking your cv's back in on a toastie day in the pilbara employ a groundsheet bivvi sorted!
---
I am here: Google Maps
Sent from my iPhone using Telepathy
Blknight.aus
16th January 2012, 03:31 PM
if its a maxi flange cap your trying to move heat it up a bit then have a go.
lardy
16th January 2012, 05:00 PM
Thanks Dave thought of that, but have no bloody burner left it back in Perth doah!
But all good cracked it using the jack handle just needed more go and vola!
All built up again now just do the dif oil and she'll be right....fingers crossed
---
I am here: Google Maps
Sent from my iPhone using Telepathy
cewilson
16th January 2012, 05:54 PM
Sometimes trying to do it up a little instead of trying to undo it can be enough to get it to 'crack' - then it will undo easier.
Other thing I do is balance the hub nut on a jack stand - makes it easier to get more leverage.
Cheers
Chris
lardy
16th January 2012, 06:05 PM
A good job deserves a bourbon and I just opened one !!
And that is the end of my weekend;-( least I got a session down the range in :-) and maintained the landy too boot, it deserves it always does what I ask of it so can't complain, cheers all
---
I am here: Google Maps
Sent from my iPhone using Telepathy
djam1
16th January 2012, 06:06 PM
Ah Karratchi,are you near the tavern?
---
I am here: Google Maps (http://maps.google.com/maps'll=-20.682649,117.140375)
Sent from my iPhone using Telepathy
Yea mate thats me
Loubrey
16th January 2012, 08:20 PM
Lardy,
If you guys are meeting for a drink at some point, give me a shout. I'm just in Millar's Well, so less than a "K" from the Tavern.
Seen your vehicle in Wickham before...
lardy
16th January 2012, 10:19 PM
Sounds a plan maybe see if craigE wants a trip over from Newman and we could have a Barbie to make it worth his while!
At this rate we will have to ask Dave for a pilbara section lol
Sent from my iPhone using Telepathy
djam1
17th January 2012, 08:44 AM
Sounds good
PAT303
17th January 2012, 11:05 AM
Sounds a plan maybe see if craigE wants a trip over from Newman and we could have a Barbie to make it worth his while!
At this rate we will have to ask Dave for a pilbara section lol
Sent from my iPhone using Telepathy
So I'm not invited. Pat
lardy
17th January 2012, 11:04 PM
Blimey Pat sorry mucker course you are I had it in my head you were in the east, thought that trip to Perth was a long holiday doah. Maybe I should start a new thread and see who we can round up!
Sent from my iPhone using Telepathy
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.