Gearbox PTO drives

[klonk]

Hi all,

Was after some advice please as to whether or not a PTO drive from a 64 S2a will fit on Klonks 80'' gearbox. I was poking around the wreckers the other day and found one but didnt have time to remove it, but will go back and get it. It is just the lever and output shaft from the gearbox,no pulley and no sign of what was driven by it. Might use it to drive an aircomppressor to blow up tyres after the beach runs.

Cheers Steve

[123rover50]

Yes. All the series are interchangible except the ones on the all helical boxes as fitted to one tons and forward controls.

[wrinklearthur]

Steve

Don't go to work today, just go get it before another bit of metal gets sent off to Ch*na ! :whistling:
.

[Lotz-A-Landies]

A lot of 80" came with just the gearbox output and nothing attached to it.

If it is one with a short lever with a knob coming off the top of the selector rod. it is correct for a series 1.

[klonk]

Thanks Guys

Yes Diana it has a short lever and Knob on top of the transfer box so you have to access it though the flap under the middle seat.

Arthur no word of a lie there are about 40 acres of scrap steel and the landys are right at the back, hope they werent first in :eek: . Its a farm machinery wreckers.

Cheers Steve