View Full Version : Replacing dash globe
Barney2803
18th March 2012, 08:10 AM
Hi guys,
The globe on the right hand side of the instrument cluster that illuminates the fuel gauge and a bit of the speedo has blown. As I travel to work in the dark each day, it is a small annoyance but nothing major. Has anyone changed this globe and is it an quick/easy job to do?
Sent from my iPhone using Forum Runner
Andrew D
18th March 2012, 10:13 AM
Hi guys,
The globe on the right hand side of the instrument cluster that illuminates the fuel gauge and a bit of the speedo has blown. As I travel to work in the dark each day, it is a small annoyance but nothing major. Has anyone changed this globe and is it an quick/easy job to do?
Sent from my iPhone using Forum Runner
The hardest part is removing the moulding from around the instruments. There are two screws near the steering column and then two clips at the front of the dash. Undo the two screws first then just play with the dash moulding. Should pull back then up, something like this. The instruments themselves are even easier to remove. Might pay to check it all in Rave first though but easy job. Also check out what globe you need.
Regards
Andrew
Barney2803
18th March 2012, 10:26 AM
Thanks Andrew that was my suspicion. I will check rave for the globe I need then might have a bash, I mean; a go at it.:)
Sent from my iPhone using Forum Runner
Powered by vBulletin® Version 4.2.4 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.