PDA

View Full Version : HELP! Llamas install in RRS 2011!


KOCHED
25th March 2012, 03:19 PM
Hey guys, anyone installed a llams kit in a 2011 model? I am trying todo it now but keep getting suspension fault while trying to calibrate. Any help would be much appreciated! Even a phone call - 0418 567 569. HELP!!!!!
101RRS
25th March 2012, 03:43 PM
While I can understand that you think you are driving a Range Rover (Sport) and would post in the Range Rover section - you actually need to post and search in the D3 section. Logic being that the RRS is closer to a D3/D4 than a Range Rover - but if you drive a Range Rover Evoque it is considered to be closer to a Range Rover than a Freelander 2 so you post in the RR section:confused: - but I digress.

You will see plenty of posts in that section but if you look in the Veranda section you will see thread on LLAMs where the designer and builder provides updates fixes and a whole lot of other interesting stuff.

Garry
Graeme
25th March 2012, 03:50 PM
Call has been made - loom will be swapped tomorrow.

Edit: The loom can be fitted on the spot if the covers are left off and you have 5 minutes.
Fred Nerk
26th March 2012, 06:12 PM
Oh! I thought this was going to be about alpaca and camel options. Makes one want to spit. :D
gghaggis
26th March 2012, 06:18 PM
I'd be impressed if he could get a llama in a Sport! Maybe with a sunroof?
:D

CHeers,

Gordon
justinc
26th March 2012, 08:01 PM
Wouldn't want the cream Leather option with those Llamas stuck in there for an hour or two:eek:

Or maybe, just MAYBE the RRS is destined for chauffeuring around a certain Eastern Deity????
Pics or it didn't happen!!!:p

JC
discotwinturbo
26th March 2012, 09:11 PM
While I can understand that you think you are driving a Range Rover (Sport) and would post in the Range Rover section - you actually need to post and search in the D3 section. Logic being that the RRS is closer to a D3/D4 than a Range Rover
Garry

Garry....I don't get that.
This shows up in my D3,D4, RRS section for me.
Maybe it has been moved.....or I must be missing something?
Brett
101RRS
26th March 2012, 09:18 PM
Garry....I don't get that.
This shows up in my D3,D4, RRS section for me.
Maybe it has been moved.....or I must be missing something?
Brett

Yes was originally posted in the Range Rover section - it would seem that the lovely mods (Ron???) have quietly moved it to the RRS/D3/D4 section hoping it would not be noticed :o.

Garry
Platypus
27th March 2012, 10:27 PM
llamas ? anything to do with Camel trophy???:D
KOCHED
30th March 2012, 05:29 PM
Stupid autocorrect! Thanks for the comments boys!

Graeme - can you call me - I lost your number in a phone upgrade. Having issues still.
Graeme
30th March 2012, 07:26 PM
Only an overheating compressor leaving the rear raised and the front low.
400HPONGAS
2nd April 2012, 10:12 PM
Spot on Graeme, just had the same thing . Dropped out compressor ,removed all dessicant from dryer ,cleaned out compressor area ,refitted compressor, pumps up and down better than it ever did. Thats a Temp fix ,until can recharge drier with a better Dessicant !!
Oops, forget no 2 most common Fault , a Jamming relay on the Compressor .These were supposed to be changed by the stealers everytime they changed a compressor.
KOCHED
29th June 2012, 10:24 AM
Going to install in a friends car and have lost the instructions! Anyone out there (Graeme) that would be able to email me a copy on the instructions? dustinp@optusnet.com.au

Cheers in advance!
101RRS
29th June 2012, 10:28 AM
Going to install in a friends car and have lost the instructions! Anyone out there (Graeme) that would be able to email me a copy on the instructions? dustinp@optusnet.com.au

Cheers in advance!

Have a look here - search is your friend - links at the bottom of the first post but have a look through the entire thread as well

http://www.aulro.com/afvb/verandah/114282-llams-electronic-height-controller-d3-d4-rrs.html

Cheers

Garry