Aligning Doors

[Yorkie]

hi all,
since i have got the car back from panel repairs i have noticed alot of wind noise around the passenger door. also when i washed the car water was getting through in the top right corner.
it seems like the door needs to move up at the top right, i tried following the rave method but was wondering if any tips, have not been able to move the striker yet as not a big enough torx head available.

appreciate any advice.

[Andrew D]

There is also some adjustment in the window frame (glide rail for the window). Five torque screws. Believe the workshop manual only shows four.

Regards
Andrew

[Franz]

hi all,
since i have got the car back from panel repairs i have noticed alot of wind noise around the passenger door. also when i washed the car water was getting through in the top right corner.
it seems like the door needs to move up at the top right, i tried following the rave method but was wondering if any tips, have not been able to move the striker yet as not a big enough torx head available.

appreciate any advice.
Try adjusting the top of the door frame - you'll need to remove the door skin and loosen and retighten the bolts holding the frame in place. This should cure the wind noise without adjusting anything else.

Cheers,

Franz