Tc sensor

[hoopsnake]

Hello all , I need some help my right hand front tc / abs sensor keeps on lifting up about 10mm causing my light to come on ! I have rebuilt my swivel hub so all new parts apart from sensor . It was happening before rebuild and now after rebuild . I push the sensor down but it only last about 2 km. any ideas ??
Cheers

[steve_a]

Speaking from D2 experience but is not secured by a bolt? I guess the other option if not is the good old silkaflex/silicone sealant to keep it in place?

Just reading the WSM for a disco and the process is to push the sensor in until it actually contacts the ring. When it's driven the sensor will be pushed out to the right place. I guess you might substitute spinning the wheel to driving and then seal in place?

Just shooting in the dark without knowing what year the vehicle is

[hoopsnake]

Sorry it's a 2003 defender extreme

[djam1]

Did you refit the bushing that holds tension on it when you put it back together?

[hoopsnake]

Yes replaced everything , new seal and cooper insert for sensor as well

[Lorryman100]

Is there enough slack in the ABS harness to account for suspension/steering travel? The harness could be pulling the sensor out of position causing the large air gap and illuminating the MIL?

Brian.