PDA

View Full Version : Which seal do I Leave Out



maggsie
21st June 2012, 10:57 AM
Fitting Ashcroft axles and flanges to the rear of the 110 Puma, which seal do I leave out so the splines are constantly lubricated? The rear axle parts list numbers are: 15 FTC5628 - oil seal; 14 - Part No:FTC4785-oil seal; or 8 FRC8222 - seal. I am guessing it is No: 8 - FRC8222.
Your assistance required please.

Regards
Maggsie

2010 Puma 110
2004 V8 Discovery (to go on 20th July)
Future Grey Nomad (beginning August 22nd)

woko
21st June 2012, 11:17 AM
You need a different seal altogether if you want to run the wheel bearings and lubricate the splines in oil. You need to fit RTC3511 to the hub, and remove the seal in the stub axle behind the needle roller bearing.