View Full Version : Blinkers
Chops
20th August 2012, 08:14 PM
Gday guys, 
My Puma has a minor problem with its blinkers, not blinking. Sometimes you can turn them on, theyll work as normal, and sometimes when turned on, they just light up and dont blink, and sometimes they work for a bit, then stop. 
When it was in for it's 20k service, they couldn't replicate the problem, thus couldn't fix it. 
Has any body else had this problem? 
Chops
Nera Donna
20th August 2012, 10:43 PM
I'd be looking at the 'flasher can' (flasher relay) first off. And then go from there. 
Bulbs next. Could be a bulb with a loose connection, simulating a blown globe? 
Lastly switches. If it does it with the indicator stork again. Turn on the Hazard lights. If the hazards flash and the indicators don't, that would indicate the switch to me.  
Good luck
Chops
21st August 2012, 06:49 AM
Cheers ND, the hazards do the same thing, so my guess is the flasher too. It annoys me that it did'nt happen when at the dealers,, would'nt be so bad, but they had to drive 30Klm through Melb to get it back to me :mad:.
portafilter
21st August 2012, 07:23 PM
It's the flasher can relay. Mine did the same. And funnily enough ULR were the cheapest replacement. (non-Internet)
BenN
27th September 2012, 07:18 AM
Bump,
 I am due for an inspection and the rear directional was not working...I was fiddling with the bulb and left the directional on to test it (it was now working)...got a phone call and left the directional on... when I came back the blinker was no longer flashing in the front or showing up in the dash.  I can't get the directional to work in either direction and it does not show up on the dash to indicate I am signaling in either direction.
The hazards work.  Is this the switch as stated above or a flasher relay? The hazards are working perfectly.
I have never had a problem with the TDCI and have only changed the oil as of yet.
solmanic
27th September 2012, 07:37 AM
Yep, flasher relay. I have had two of these fail on mine already - years apart though. Hazards always worked fine. Don't waste time trying a self diagnosis - just swap the bastard out.
BenN
27th September 2012, 07:43 AM
Pulled the relay going to get a replacement tomorrow.
Anyone have the part number if I want to order an LR original?
Does it make sense that the directional it is not even showing up on the instrument cluster?
BenN
21st October 2012, 11:38 AM
Can someone link me to the part (preferably on ebay.com)?...I have now ordered three of them online and keep getting shipped the wrong relay.  They don't carry it in any stores locally.  Anyway, I would really appreciate it as I'm going nuts looking for it.
Ben
BenN
21st October 2012, 11:41 AM
Can someone link me to the part (preferably on ebay.com)?...I have now ordered three of them online and keep getting shipped the wrong relay.  They don't carry it in any stores locally.  Anyway, I would really appreciate it as I'm going nuts looking for it.
Ben
Is this the correct part (below)... I would prefer to order it within the US...I just can't find it.  The original said (6x21)...can someone confirm that specification is correct?
Durite 0 744 62 Flasher Hazard Unit 2 1 6 x 21 Watt 12 Volt CD1 | eBay (http://www.ebay.com/itm/Durite-0-744-62-Flasher-Hazard-Unit-2-1-6-x-21-watt-12-volt-Cd1-/261085389173?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3cc9e6e175)
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.