looking for bulb holder for interior lights

[Steve223]

during my LED conversion I unfortunately lost a little black plastic pice which holds the bulb for one of the interior lights to the depths of my roof lining.

called around and it seems like I need to purchase the whole interior light set for the middle.

On the image you see the little black plastic thing missing on the top.

cheers

steve

[p38arover]

It looks like a bog standard wedge base lamp holder available at auto parts stores or from LR. Can you show a pic of the remaining one at the bottom of the pic?

[Steve223]

hm I called LR and they said I would need to purchase the whole interior set

http://www.4sdata.net/skitch//ima-20121119-113259.png

[p38arover]

Steve, take the bulb holder out of the assembly and show us the view from the side and maybe from the bulb side. I assume it is a wedge base bulb.

[Steve223]

sorry images attached side view and from top without bulb

[p38arover]

It looks like a standard T-10 / T-15 wedge base lamp holder with an LED light fitted - Hella brand - but others make them, e.g., Narva 49806

For a single holder, ask for a 49806BL

https://www.aulro.com/afvb/images/imported/2012/11/508.jpg

https://www.aulro.com/afvb/

[Steve223]

It looks like a standard T-10 / T-15 wedge base lamp holder with an LED light fitted - Hella brand - but others make them, e.g., Narva 49806

For a single holder, ask for a 49806BL

https://www.aulro.com/afvb/images/imported/2012/11/508.jpg

http://www.aulro.com/afvb/attachments/d3-d4-rrs/53470d1353308225-looking-bulb-holder-interior-lights-ashampoo_snap_2012.11.19_17h53m12s_001_.jpg

Great help thanks a lot just ordered one

[p38arover]

I hope I'm right! :o

[Steve223]

Lol me to,

Bought two from eBay so hope they fit

Can't believe that LR told me I can only buy whole light assembly

[p38arover]

Lol me to,

Bought two from eBay so hope they fit

My local auto parts store has them on the rack.


Can't believe that LR told me I can only buy whole light assembly

MicroCat won't run on my Win 7 64-bit PC to check. With LR you need to know the part nos. and be able to quote them. That part is probably available separately but elsewhere in the parts list.

[Steve223]

the ones I bought from eBay did fit but don't work it seems like the LR contacts are a bit higher then the ones I got

will keep searching with one bulb less

[p38arover]

Can you bend the contacts?

[Steve223]

Can you bend the contacts?


tried that but they don't get high enough up

[sniegy]

Steve PM me your address, I am sure they are a spare part, I may even have a spare in my tool box.

Cheers

Sent from my iPad using Forum Runner