PDA

View Full Version : Alarm Issue



Road Stone
22nd December 2012, 11:24 PM
Hi Folks,
Have an odd issue with the alarm on my V8 2000 ES, in that all is normal re opening/closing with the remote unless the vehicle stands locked for 8 hours or more, ie over night.

Over this time period I have to unlock using the key and then disarm the alarm with the remote.
Is there a reason for this/has it been set this way? I have a Hawkeye but don't know if that can help

Cheers Jerry

jafir
23rd December 2012, 05:17 AM
The BCU might be going to sleep due to rf interference.

http://www.landroverclubvi.com/uploads/2/3/9/8/2398536/bcu_sleep-mode_troubleshooting_and_upgrade_8601nasf_2.pdf

Road Stone
23rd December 2012, 03:08 PM
Okay thanks and looks like what I have.

Just have to live with it because really don't want /need to change the BCU!

Cheers for the info

dmdigital
23rd December 2012, 03:30 PM
Could also be the battery is on the way out.

The BCU may record an error code for the alarm trigger. You should be able to check for this with the Hawkeye unit.

disco2_dan
11th January 2013, 11:27 AM
I found mine doing this nearly every night it was cold!!! But since I changed the battery it hasn't done it, to avoid the alarm use the key to manually unlock then remove the key from the door and press unlock like normal, well that's what works for me, but since I got the new 1000cca battery it's been good, but haven't had any terribly cold nights either which is when I noticed it did it.