PDA

View Full Version : Un-even suspension 110 tray back.



LOW135
27th December 2012, 08:18 PM
Hi all,

I recently decided to replaced spring and shocks in my 95 110 single cab ute because the front left was a bit sagged and shockers were flogged out

I replaced all round with new ones,

And the front of the ute is still sitting slightly out of level, dipping down about 10 to 15 mmin the front left corner.
Is this a common problem?
What do I need to do to fix?

Thanks

460cixy
29th December 2012, 11:07 AM
The springs would of been left and right handed it sounds normal to me once your in it levels out

clive22
29th December 2012, 11:27 AM
Hi

Yes that sounds right to me too.

When I did my springs a little while back the passenger sides sits lower to account for weight of driver and road camber a bit too I'd guess.

My Suspension Stuff front springs where clearly labelled to go this way.

Clive

460cixy
29th December 2012, 12:53 PM
Mines got good lean on with its brand new dobbinsons mines a 110 tray back and the springs were marked left and right

LOW135
29th December 2012, 08:11 PM
Ok no worries, springs were marked lef and right and I put the. In the correct side, less concerned now to know others are the same, I can stop worrying so much now
Thanks