Anti Roll linkage

[XHPBT1]

Hey guys I have lifted my D2 with a 2" lift

Having a problem with the rear anti roll linkage it keeps popping out or should I say breaking the linkage arm

Can anyone let me know how to fix the problem it's driving me nuts!

Cheers

Sent from my iPhone using Forum Runner

[Slunnie]

You will have to replace it with a new one.

[twr7cx]

Swaybar or ACE?

Not sure if swaybar setup is drastically different. But with ACE, you can get a extender from Les Richmond Automotive. It bolts onto the differential mount tabs and lifts up the mount point for the linkage pin.

Alternatively, I think you can fit the front ACE link pins to the rear (as the front units are longer).

Obviously the above two suggestions are only relevant if the problem is due to the suspension lift vs standard length link pins.

[XHPBT1]

Swaybar or ACE?

Not sure if swaybar setup is drastically different. But with ACE, you can get a extender from Les Richmond Automotive. It bolts onto the differential mount tabs and lifts up the mount point for the linkage pin.

Alternatively, I think you can fit the front ACE link pins to the rear (as the front units are longer).

Obviously the above two suggestions are only relevant if the problem is due to the suspension lift vs standard length link pins.

It's a swaybar setup,

What have other people done with 2 or 3inch lifts?

Sent from my iPhone using Forum Runner

[Slunnie]

It's a swaybar setup,

What have other people done with 2 or 3inch lifts?

Sent from my iPhone using Forum Runner
Very few people change them. If they do, most are disconnects. The front links are long already but the rears will run out to about 4" lift. They are a part that wears though and they don't live forever. I've broken them before also and they were fine after replacement.