Which rear hub?

[winaje]

Hi all. I have to replace the left rear hub ASAP, and found this link:
http://www.lrdirect.com/TAY100050-Rear-Hub-and-Flange-Assembly-Ds2/
Considering that I'm on a tight budget, can I have your thoughts on the Bearmach unit? Can I reasonably expect 100k out of it, for instance?

Thanks

[kelvo]

I would only fit one with Timken bearings, Paddock have an oem (No mention of any brand name) one for £185, while Island 4x4 have the Timken for £200.

But it also depends on how your Disco gets used, short distance sealed roads with a light load cheap will probably be ok, anything more go quality.

[rick130]

FWIW a lot of Bearmach parts are OEM in a Bearmach box.

I can't say the hub is, but a fair bit of their gear is very good quality IME.

[winaje]

Thanks gents

[Graeme]

You could try Karcraft if you need one urgently. They list the part number.

[Rick Fischer]

Don't know about the bearings in the hub. Mine never failed. However, I did three sets of seals that required bearing pack replacement. :(

That particular axle was never happy after Savoury Creek on the Canning.

RF