Fan removal tool in Brisbane

[Mattblack59bus]

Does anyone have a 36mm fan removal tool, that they are willing to let me use on the weekend to change the thermostat on my TD5 discovery?

I'm thinking of buying this set, but it wouldn't be here for another week.

[Vern]

Make one from a piece of flat steel

[dunk_98]

yes i do i'm in wynnum west PM me

[Mattblack59bus]

PM sent

[VladTepes]

Does anyone have a puller that I could use to get the fan off the camshaft of my Honda (bike) ?

[TeamFA]

Does anyone have a puller that I could use to get the fan off the camshaft of my Honda (bike) ?

I have a nice little hydraulic puller that might do the trick...
This one:
TradeTools - 66622-FORCE HYDRAULIC GEAR PULLER SET (http://www.tradetools.com/products/66622)

[VladTepes]

Looks terribly complex ! I was thinking more along the lines of a wind off one on a bolt. I've no doubt that somewhere in all that kit is the relevant parts to do the job I need though !

[Blknight.aus]

probably got something workable...

may as well come have a look on the puller set on saturday.

[Mattblack59bus]

What about one of these?

[TeamFA]

What about one of these?

The one I've got isn't much more complicated to use than that... available to borrow and give you a run-down if you like.

[VladTepes]

What about one of these?

That was the one I had in mind.

Whereabouts in Brissie are you ?

I'll hassle you or TeamFA - whoever is closer......

[Mattblack59bus]

That was the one I had in mind.

Whereabouts in Brissie are you ?

I'll hassle you or TeamFA - whoever is closer......

Message sent.

[TeamFA]

That was the one I had in mind.


I have one of those too...

[VladTepes]

I wonder which of you is closer to Petrie Markets. I'll probably be there tonight with the 59 club..... and could make a detour.

[Mattblack59bus]

Thanks dunk_98 for the loan of the fan tool, I changed the thermostat today.
I have ordered the difflock.com two part fan removal tool (in my picture above) should get that next week ready for next time.

Cheers
Marc

[Sitec]

Cats are good for fan removal.... Not so good for the cat... Or the fan for that matter!!! Sorry, couldn't resist. Cats used to have a habit of crawling through the fan on Early Defenders (inc mine) in the UK as it was a warm hidden place.. not so good when you fire up the next morning and find fan blades on the road! Cat re appeared a week later with a tail shaped like a cork screw. Finally the 6 piece fan made sense!!!!! :D

[Mattblack59bus]

Not sure about the cat, but I did receive my new tool from Difflock dot com today, Looks heavy duty!