Drivers side rear window regulater removal

[BRUMMY]

Hi Everyone
My rear drivers side electric window has ground to a crunching halt.Grinding noises came from it and the window would only go half way up..(in the rain of course)
After pulling the door card off I mananged to get the window up with the help of a piece of wood...
It does not look to complicated to replace except I cant get to the upper bolts,they are behind the glass,any tricks to doing this.
Cheers Paul

[Homestar]

Does - or can - the glass come out first? Failing that, leave the lump of wood there...:angel::wasntme:

[BRUMMY]

The glass is in its runners, attached to the regulator by one torqe screw.I'm thinking if I remove that then the glass will drop down and I can then get to the upper screws.I dont want to start anything I cant finish.....The regulator has to come from the UK, no stock in Australia.
The lump of wood is still there and holding well.......ha ha

[Laurie]

Brummy
Are these guides any help ?


Laurie

[BRUMMY]

Thanks Laurie.That made it so much easier.
Paul

[BRUMMY]

Thanks Laurie for the glass removal instructions.
Do you have the procedure for refitting the door handle on the same door, I dont have any knuckles left.....and still the handle wont work.
Cheers Paul

[Laurie]

Brummy
Sorry it took a while ! been in Sydney. Is this enough or do you need more ?

Laurie

[Laurie]

Here it is.

[BRUMMY]

Hi Laurie
Thanks for the pdf, its actually the interior R/H rear door.I cant get the cable to fit back onto the interior door handle.
It came off easy when I took the door card off,but reattaching it to the handle has me stumped...
Cheers Paul

[Laurie]

Brummy does this help ?

Laurie