dunnymel
25th March 2013, 09:03 PM
Hi all
After much investigating I finally have a folding 140W panel system with MPPT controller and 5m cable with alligator clamps from ebay.
My deep cycle battery is mounted externally on the front of the camper trailer in a plastic battery box, with 4 x 12v cigarette lighter sockets throughout the trailer.
To tweak the system I want to;
1) Have a longer cable to enable more flexibility to move the panel out from under shade. 10m should do it.
2) Mount the controller close to the battery.
3) Potentially upgrade the controller to one with a digital readout to enable monitoring of performance.
I believe that cable size is a consideration to minimise voltage drop. What type and size cable do I need? (or does this now not matter if controller is close to battery?)
How best to rig the controller up near the battery so I still have a convenient plug and go system when we are making camp?
Can I monitor panel performance with a multimeter?
Thanks folks.
Cheers
Andrew
After much investigating I finally have a folding 140W panel system with MPPT controller and 5m cable with alligator clamps from ebay.
My deep cycle battery is mounted externally on the front of the camper trailer in a plastic battery box, with 4 x 12v cigarette lighter sockets throughout the trailer.
To tweak the system I want to;
1) Have a longer cable to enable more flexibility to move the panel out from under shade. 10m should do it.
2) Mount the controller close to the battery.
3) Potentially upgrade the controller to one with a digital readout to enable monitoring of performance.
I believe that cable size is a consideration to minimise voltage drop. What type and size cable do I need? (or does this now not matter if controller is close to battery?)
How best to rig the controller up near the battery so I still have a convenient plug and go system when we are making camp?
Can I monitor panel performance with a multimeter?
Thanks folks.
Cheers
Andrew