marc
31st March 2013, 11:15 PM
hi guys can someone set me straight with the clutch setup, is the TEA20 (fergy $200) a straight fit. I have seen a photo on here somewhere and I would think if you lay one on the bench next to a Holden one there would be a big height difference, is this easily taken up with the adjusting rods, or as I have read or hopefully misunderstood. that you have to swap the centre out and fit a rover one, just using the case for the bolt pattern to the flywheel if that is the case are they riveted in and is it a DIY job. I would like to bolt my fresh 202, new clutch and g'box together and fit as one, other than the weight has anyone done it this way, if I can't do it this way I will take the 186 and g'box out separately, that way I will know what's in there clutch wise and just replace with the same. hope someone can explain (not too technical)hope you all are having a good Easter break thanks, markus