Intake boot for LPG converted 96 model

[pdunlop]

Just wondering if anyone can point me in the right direction to find a replacement intake boot (fits between airbox and air flow sensor) for my 96 model dual-fuel Discovery? Mine has developed a split and needs to be replaced.

I thought that it was an OEM part reused during the conversion (done by LPGAS1), but I can't find anything that appears to be the same shape and size in the Discovery parts listings. Part # ESR1807 appears to be the original Discovery one, but only looks vaguely similar to mine. This one has the numbers 87DA 9C684-AA embossed into it.

Here are a couple of photos to show what I've got:

https://www.aulro.com/afvb/images/imported/2013/04/578.jpg

https://www.aulro.com/afvb/images/imported/2013/04/579.jpg

Thanks for any suggestions,
Peter

[bee utey]

That hose is off an EA Falcon multi point EFI six cylinder engine. The EB/ED hose is similar but has a much shorter flexible section and a noise reducing internal sleeve.

However you will probably be better off cutting away the flex section, installing a piece of steel pipe in the elbow end, and using a VN-VR Commodore flex hose section instead. They are noticeably stronger than the Falcon flexy bits.

BTW if you go into a shop and ask for an "intake boot" I'm not sure you will get any sense, that's an intake hose (or duct) in Oz speak...

[pdunlop]

Many thanks for the EA model info bee utey, and also for the suggestion of upgrade parts.

And my incorrect naming of the 'duct' explains why I couldn't find much in Google too.