Bearing Part Number

[BST4X4XFA]

Hi there all,

Does anyone know what the part number is of the bearing in the idler pulley to the right of the Aircon compressor and water pump on a TD5 Defender MY2002.

Mine seized up completely this evening.

Cheers, Jurgens.

[JC Rover]

I think you're meant to replace the whole thing, pulley and all. However I managed to replace the bearing, using sockets and a hammer (I now have a press). Once you take it off you can see the bearing number. It cost stuff all by itself.

Cheers,

Jono

[BST4X4XFA]

Hi there Jono,

Mine seized up and destroyed all the numbers, might just take it to my local bearing guru and ask them to measure and match.

Thanks, Jurgens .

[PhilipA]

Supercheap have a selection of idlers with several different shaft sizes.
I bet you would find one to fit and they are quite cheap, without all the hassle of trying to fix yours.
I recall a bloke with a RRC with serpentine had one go on a trip to MT Pinnibar and he found one in Khancoben of all places even though the garage guy said nah mate no chance.
Regard sPhilip A

[Yorkie]

ERR6658 is the complete unit, about $80.

[PhilipA]

AFAIR the supercheap ones are $30, but I may be wrong as I didn't take too much notice as I have new idler and tensioner.
Regards Philip A

[BST4X4XFA]

Picked up a bearing from my local bearing guru for $10.

Part No: 6303D

Got it pressed in by one of my customers, should be on the road again tonight after the rugby.

Go the Western Force!!!!!!!!!!!