Acco F1 6x6 service info

[Acco f1 6x6 cummins]

Hi my name is Allen, I have just bought a acco f1 6x6 and need to drive it 2000km to get it home the info I'm after is what type of oil go's where and how much? I would like to do a full service on it before I make the trip home and also what spare part should I take with me for the trip any info you have would be much Appreciated
Thank Allen

[Mick_Marsh]

Allen, welcome to AULRO.
By your username, I take it your International has had a deisal conversion.
It might be worthwhile asking the question on the REMLR forum as well.

[Acco f1 6x6 cummins]

Thanks for your reply mick, the acco still has the 6-283 petrol engine at the moment I have a 6bt cummins and 6 speed Allison auto to go in it when I get it home, I would like to do a service on it before I embark on the long trip home to minimise the risk of a breakdown, I was after oil types for a full service and spare parts eg: belts, filters, brake kits any thing you'd think I would need to take
Thanks Allen

[101 Ron]

80w/90 gear oil will work in gearbox, transfercase, step down boxes and diffs.
Normal 20w50 engine oil in the motor.
Check the condition of the points before leaving.
Cooling system hoses, especially the small bypass hose near the water pump.
The brake wheel cylinders specially the rear ones tend to leak with age as will hub oil seals.
Clutch master and slave cylinders have been known to fail out on the road, so check them for leakage too.
They are a simple reliable truck.

[Acco f1 6x6 cummins]

Thanks for the info, the oils seem pretty straight forward then I was not sure because I was told I had to run non EP oil in the gearbox and transfer, the parts I have so far are: new spark, points, condenser, B51 belt and one rear axle brake piston kit.
Does anyone know what the other belt size is and where I can buy the extra brake and clutch parts from
Thanks Allen

[101 Ron]

When I was in RAEME the army only used a few different oils.
OEP200...................80w/90 gear oil.........gearboxes
OEP600...................90w 140 gear oil ......diff oil

OEP stands for Oil Extreme Pressure


OMD 110 ........petrol motor engine oil
OMD 115.........diesel engine oil
OMD...stands for Oil Mineral Detergent.

You will find the rubber seals for clutch master and slave should be advailible though a PBR brake parts stockist( they will not most likely have a listing)........the truck was Aussie made and parts were locally sourced.

[UncleHo]

G'day ACCO 6 x 6 Cummins

We had no problems sourcing brake parts through REPCO for the F1,I. know of an F1 which is fitted with a Perkins 6-354 diesel,(they were a factory fit on the civilian ACCO's) most other parts should be available as well,the hardest things will be cab parts,as these trucks hadverylittleundercoating applied,and were washed down with salt water when leaving and before arriving back in Aust. If you vehicle saw O/seas service.

[UncleHo]

G'day ACCO 6 x 6 Cummins

We had no problems sourcing brake parts through REPCO for the F1,I. know of an F1 which is fitted with a Perkins 6-354 diesel,(they were a factory fit on the civilian ACCO's) most other parts should be available as well,the hardest things will be cab parts,as these trucks had very little undercoating applied,and were washed down with salt water when leaving and before arriving back in Aust. If your vehicle saw O/seas service.

[Acco f1 6x6 cummins]

Thanks all for the info on oils, does any one know what belt the alternator is, has any one modified there acco's in anyway to get better fuel economy I thought the truck was 2000km away when I worked it out it is actually closer to 3000km away, ill be driving the truck home empty, what is the liters per 100km that your 6x6 getting
Thanks Allen