eas valveblock rebuild

[i_pickers]

Hi all, I'm a newbie at all this so here goes. I am looking at rebuilding the valve block. I have already replaced all the airbags as the old ones had perished. My question is now that Hardrange is no more , where do we get o-ring replacement kits from, as well as an eas bypass kit? I'm hoping to obtain them in Aus. Anny help would be appreciated
Cheers, Ian

1995 P38
02 Triumph Trophy 1200

[mtb_gary]

Ian, welcome aboard the forum. PaulP38a (ex HRA vendor) still has some kits available. I'm sure it won't be too long before he's back on line, and help you out.
BTW, what model Rangie are you driving?

Gary

[wayneg]

Full kit inc Diaphragm

Range Rover P38 EAS Valve Block O Ring SET Diaphragm | eBay (http://www.ebay.com.au/itm/Range-Rover-P38-EAS-Valve-Block-o-ring-set-diaphragm-/190553702909?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2c5de2c1fd)

[rc42]

You can also get them from the UK from places like Island 4x4


Air Suspension Valve Block O-Ring Kit RVH100030 KIT Island 4x4 - Specialists in Land Rover and Range Rover Parts and accessories for all models. UK and worldwide mail order. (http://www.island-4x4.co.uk/suspension-valve-block-oring-rvh100030kit-p-3055.html)


Air Suspension Compressor Piston Seal Repair Kit P38 HRK3731 Island 4x4 - Specialists in Land Rover and Range Rover Parts and accessories for all models. UK and worldwide mail order. (http://www.island-4x4.co.uk/suspension-compressor-piston-seal-repair-hrk3731-anr3731seal-p-3016.html)


They also do compressors, complete valve blocks and even castration kits. Even with international postage its generally much cheaper than purchasing within Australia.

[Keithy P38]

X2 for island 4x4! I just made a large order through them yesterday. They usually freight quite quickly (5-7 days to your door).

[i_pickers]

Thanks guys for all your replies. I will make enquiries and hopefully get this sorted soon.
I should have said, vehicle is a 1995 4.6 p38 hse. I've owned it for 5 or 6 years now, and this is my first major go-bad with it, aside from an intermittent electrical fault which flattens the battery! When we disconnected the compressor/valve block it went away. However it now comes and goes!

I will wait until the valve block is rebuilt and then see what happens.

Cheers, Ian

[PaulP38a]

pm sent.

I am still around, just heavily distracted by my day job and all the shenanigans going on around Canberra ;)