PDA

View Full Version : Powerspark dizzy replacement



robert.bisset
25th June 2013, 07:04 PM
Hey guys I was just on ebay UK looking for a new rotor button when I came across this dizzy replacement and was just wondering if anyone had any experience with this product.

Rover V8 35DLM8 35D Distributor Discovery 3.9 3.5 & Powermax Red Rotor Arm | eBay (http://www.ebay.co.uk/itm/Rover-V8-35DLM8-35D-Distributor-Discovery-3-9-3-5-Powermax-Red-Rotor-Arm-/130608592287?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1e68e0f59f)

steelo
26th June 2013, 10:46 AM
Hmmm interesting, that would be a bit expensive with the exchange rate wouldn't it? I wonder if there is a distributor over here :)

THE BOOGER
26th June 2013, 11:24 AM
I have the six cylinder one in my series 3 goes well so far about 2 years now just make sure you use the right coil if you use a standard one it can burn out the module:) Haven't found an aussie distributor for power spark but the dollar is still ok but not as good as 6 months ago:)

robert.bisset
26th June 2013, 05:29 PM
Well it's $160 dollars converted plus whatever postage is but thats not to bad for an entire dizzy considering what you would pay over here, I just paid $70 for a reco vac advance!

THE BOOGER
26th June 2013, 06:41 PM
I paid $140 for a second hand one then bought the powerspark for $10 more delivered but the dollar was 20% better then:D
I have found the spark a bit better and car runs smoother plus no points to worry about:)
I did burn one out very quickly as I left the gtr coil on it but it was replaced and a put a low resistance coil no problem since