View Full Version : Bullbars
fred cabbage
7th July 2013, 06:19 PM
Hello fellow land rover owners,
Query - Is there any difference between the chassis width on a 110 1994 model and a 90 2013 model?
Want to fit bull bar off the 110 on to the 90, which I haven't got yet. So don't know if the old bar will fit onto the new land rover.
Any help would be greatly appreciated!
Thanks,
Fred
scarry
7th July 2013, 06:25 PM
We had trouble fitting a bash plate to my son's Puma.
After checking a few Puma's with a tape measure,distances between chassis rails were up to 12mm different.:o
So in answer to your question,anything is possible:D
Good luck
And welcome to the forum,heaps of good info on here...
aptfab
7th July 2013, 06:44 PM
Chassis width will be the same, clearance from the front of the grill we be different by about 75mm though.
mark_coffey
7th July 2013, 07:26 PM
I currently have a bar from a county I once had bolted to the front of my 2008 puma, not an issue.
and yes it does work, 2 emu's
dullbird
7th July 2013, 08:22 PM
I currently have a bar from a county I once had bolted to the front of my 2008 puma, not an issue.
and yes it does work, 2 emu's
how do you know? you appear to have hit a bird not a bull:wasntme:
If you had told me that you had put on a bird bar and hit two emu's, I could of been easily more impressed if there was no panel damage:p
mark_coffey
7th July 2013, 08:54 PM
basically the extreme forward rake meant the head didn't hit the bonnet or the radiator cover, the defender bar I had on a previous vehicle that was straight up allowed the head to smash into the bonnet, resulting in damage.
it also pushes roo's down and under the front of the truck, not pc but stiff poo!
fred cabbage
9th July 2013, 07:30 AM
thank-you gentlemen for your replies . sounds like the width might not be the problem but distance forward of the grill . what got me thinking about fit is that in brochure it says that the difference between a 90 and 110 is the 90 is 202 mm narrower and 182 mm lower - I thought that panels e.t.c would be interchangeable . need to get the 2 models together and run a tape over . thanks again , fred
UncleHo
9th July 2013, 09:26 AM
G'day Fred.
To my knowledge they are both the same up to the rear of the front door but differ from the"B" pilar back in length.
Powered by vBulletin® Version 4.2.4 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.