12v 200 psi compressor

[TerryO]

Has anyone looked at or know about the Air Zeneth 200 psi compressors?

YouTube (http://m.youtube.com/#/watch?v=A7IEhIQ4UUQ&desktop_uri=%2Fwatch%3Fv%3DA7IEhIQ4UUQ)

[CaverD3]

Try this link:
AIR-ZENITH 200PSI OB2 Compressor from Air-Zenith ID 9390 - YouTube

It has enough pressure to refill the air tank for the air suspension unlike others.

$400 od

AIR ZENITH 200 PSI OB2 CHROME COMPRESSOR - Air Ride Suspension Supplies (http://store.airide.com.au/store/air-zenith-200-psi-ob2-chrome-compressor.html)

[TerryO]

Thanks Caver, so the question is has anyone got one and are they as good as they reckon?

The only negative thing to me is it looks like they would need to be hard wired in because of the large current draw. Is 40 amps more than the usual 150 psi compressors draw?

[rocmic]

Terry
Just had a quick look and the Bushranger 150 psi models seem to draw 27 - 29 amps. My TJM 120 psi max draws 30 amp
Cheers
Mike

[Scouse]

I reckon the P38 guys would love to know about this compressor :cool:.

[TerryO]

Then Scott, please let them know about it. ...:angel:;)

[Graeme]

Run the compressor from a 50A Anderson connector.

[TDV6]

The compressor from a classic RR has a stall pressure of 300psi, but the RR circuitry setting is 150psi so there should be heaps around from those going to coils and without the RR circuitry you should be able to repressurize your air tank as well as provide alternate on board air for tyres.

HTH,

Ryall

[CaverD3]

You may find, like the D3 compressor it does not produce enough volume for tyres.